 |
 |
| The
JVT Slip-Fit pushrod provides the engine builder
with an adjustable pushrod that maintains valve
lash, decreases pushrod deflection and helps to
stabilize the valvetrain at higher rpm. By removing
the tool steel pushrod tip and adjusting the hardened
shim, precise valve lash settings can be easily
obtained. |
|
 |
7/16"-1/2"-7/16"
Tapered.120" Wall
VTW-KPR-71750
1/2 Straight .188" Wall
VTW-KPR-10050
|
JVT’s
3 piece double tapered pushrods are designed to withstand
the incredible open spring pressures used in today’s
V-Twin racing engines. They can be ordered in 3 different
diameters depending upon your application. Each pushrod
is manufactured from a chrome moly steel alloy designed
to reduce harmonics transferred from the lifter to
the rocker. The pushrods are assembled with a heat
treated Tool Steel tip to reduce friction and wear
under extreme loads. |
|
MODULAR
3-PIECE PUSHRODS
7/16”-1/2”-7/16”
Tapered .120“ Wall
KPR-71700
1/2”-9/16”-1/2” Tapered
.120“ Wall
KPR-19100
1/2” Straight .188” Wall
KPR-10000
|
JVT’s
pushrod tubes feature anodized billet aluminum sockets
that are joined by a stainless steel tube. The spring
tensioned, slip fit design does not require any tools
for installation or removal and allow the tubes to grow
with the engine. |
PUSHROD
TUBE KIT
Use
with JVT Valvetrain
VTW-KPT-1000
Use with OEM Valvetrain
VTW-KPT-1001
|
 |
 |
PUSHROD
RECIEVER
Part number
corresponds with valvetrain kit and rocker ratio. |
| For
all of your automotive valvetrain needs please visit
JESEL Valvetrain Innovation at www.JESEL.com
|
|
|
|
|
 |
|
